|
Overview
No gravity mixer has the characteristics of strong, high efficiency, short mixing time, mixing design time of 1~3 minutes, 1:1000 put the proportion of uniformity is more than 95%; in horizontal tube two stirring shafts isokinetic reverse rotation axis angle of blade arrangement to ensure that the material special radial and circumferential and axial motion to throw three, forming a composite cycle and achieve uniform mixing in a very short period of time.
A, mixed effect
Even if the material proportion, particle size differences, in staggered arrangement of mixing blades rapid somersault away, can achieve very good mixing effect.
B, crushing device
The material has Baotuan agglomeration phenomenon, need to increase the crushing device, with a triangular tooth cover "broken stick" to maintain a high speed of more than 1400rpm, the material will reunite material crushing, floating zone depolymerization.
C, the material form
The material form is generally pneumatic (manual) valve flap valve, close to the cylinder, and the cylinder wall, no material accumulation and mixed dead phenomenon; standard type has opened the door to open the door, large open to the tube side, clean and quick discharge, less residual.
D, two blade blade
In order to reduce the cost of the replacement of the equipment wearing parts, blades can be made into two pieces, and a piece of movable blades can be moved on the base of the blade. The gap between the blade and the cylinder body and the cylinder wall directly influences the mixing effect and the residual material in the body, and the gap between the blades and the cylinder body is controlled in 3~5mm.
|
